17
FIRMWARE UPDATE STEP
1
Download the latest version fi rmware (function or WI-FI) to your PC.
2 Set the Console into AP (access point) mode then connect the PC to the console (ref to "SETUP WI-FI
CONNECTION" section in previous page)
3
To update the Function fi rmware, click the
Browse
in Function fi rmware section and browse to the
location of the fi le you download in step 1. To update the WI-FI fi rmware, click the
Browse
in WI-FI
fi rmware section.
4 Click the corresponding
Upload
to start transfer
the fi rmware fi le to console (indicated by a transfer
completion %)
Upload
30%
Browse
C:\download\PWS_SYS bin
Upload
Browse
Function firmware version: 1 00
WiFi firmware version: 1 00
3
4
5
Once the console received the fi rmware fi le, it
executes the update automatically as indicated by the
update progress on left top side of the display (i e
100 is completion)
e g 50% update progress
6 The console will restart once the update completed
NOTE:
-
Function and WI-FI fi rmware cannot be updated at the same time, you need to update one by one.
-
Please keep connecting the power during the fi rmware update process.
- Please make sure your PC's WI-FI connection is stable
- When the update process start, do not operate the PC and console
-
During fi rmware update, the console will temporary stop upload data. It will reconnect to your WI-FI router
and upload the data again once the update success If the console cannot reconnect to your router and/or
upload the weather data, please enter the SETUP page to setup again
OTHER SETTING & FUNCTIONS OF THE CONSOLE
CLOCK SETTING
This console is designed to obtain the local time by synchronize with the assigned internet time server If you
want to use it offl ine, you can set the time and date manually. During the fi rst time startup, press and hold the
[ WI-FI ]
key for 6 seconds and let the console back to normal mode
1 In normal mode, press and hold
[ CLOCK SET ]
key for 2 seconds to enter setting
2 The setting sequence: Time Zone
→
DST ON/OFF
→
Hour
→
Minute
→
12/24 hour format
→
Year
→
Month
→
Day
→
M-D / D-M format
→
Select N/S hemisphere moon phase
→
Time sync ON/OFF
→
weekday Language
3 Press
[ ]
or
[ ]
key to change the value Press and hold the key for quick-adjust
4 Press
[ CLOCK SET ]
key to save and exit the setting mode, or the unit will automatically exit the setting
mode 60 seconds later without pressing any key
NOTE:
- In normal mode, press
[ CLOCK SET ]
key to switch between year and date display
- During the setting, you can press and hold
[ CLOCK SET ]
key for 2 seconds to back to normal model
Manual_7002535_WS-Wind-Sensor-3in1_en-de_BRESSER_v072019a.indb 17
04.09.2019 12:27:05
