18
MOON PHASE
The moon phase is determined by the
time, date and time zone The following
table explains the moon phase icons of the
Northern and Southern hemispheres Select
the Northern and Southern hemispheres by
using the " Select N/S hemisphere moon
phase" in
[ CLOCK SET ]
Northern
hemisphere
Moon Phase
Southern
hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning Crescent
SETTING ALARM TIME
1 In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit flashes to
enter alarm time setting mode
2 Press
[ ]
or
[ ]
key to change the value Press and hold the key for quick-adjust
3 Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4 Press
[ ]
or
[ ]
key to adjust the value of the flashing digit.
5 Press
[ ALARM ]
key to save and exit the setting
NOTE:
-In alarm mode, the “ ” icon will display on the LCD
-The alarm function will turn on automatically once you set the alarm time
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1 In normal mode, press
[ ALARM ]
key to show the alarm time for 5 seconds
2 When the alarm time displays, press
[ ALARM ]
key again to activate the alarm function
Or
press
[ALARM ]
key twice to activate the alarm with ice pre-alarm function
Alarm off
Alarm on
Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30 minutes earlier if
the outdoor temperature is below -3°C
When clock reach the alarm time, alarm sound will start
Where it can be stopped by following operation:
-Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in the next day
-By pressing
[ ALARM / SNOOZE ]
key to enter snooze that the alarm will sound again after 5 minutes
-By pressing and hold
[ ALARM / SNOOZE ]
key for 2 seconds to stop the alarm and will activate again in
the next day
-By pressing
[ ALARM ]
key to stop the alarm and the alarm will activate again in the next day
NOTE:
-The snooze could be used continuously in 24 hours
-During the snooze, the alarm icon “
” will keep flashing.
Manual_7002535_WS-Wind-Sensor-3in1_en-de_BRESSER_v072019a.indb 18
04.09.2019 12:27:05