Bresser 4CAST CV WIFI, Инструкция по эксплуатации

Страница: 31 / 92

31
4.5 OTHER SETTING
4.5.1 TIME, DATE AND OTHER SETTING
Press and hold the [ SET ] key for 2 seconds to enter the setting mode. Press [ / MOD ]
or
[
/ NDX ] key to adjust, and press [ SET ] key to proceed with next step of the setting. Please refer
to following setting procedures.
Step Mode Setting procedure
[SET]
+2s
Time sync ON/
OFF
Press [ / MOD ] or [ / NDX ] key to enable or disable Time Sync
function.
If you want to set the time manually, you should set Time Sync OFF.
[SET] Hour Press [ / MOD ] or [ / NDX ] key to adjust the hour.
[SET] Minute Press [ / MOD ] or [ / NDX ] key to adjust the minute.
[SET] 12/24 hour format Press [ / MOD ] or [ / NDX ] key to select 12 or 24 hour format.
[SET] Year Press [ / MOD ] or [ / NDX ] key to adjust the year.
[SET] Month Press [ / MOD ] or [ / NDX ] key to adjust the month.
[SET] Day Press [ / MOD ] or [ / NDX ] key to adjust the day.
[SET] MD / DM display
format
Press [ / MOD ] or [ / NDX ] key to select "Month / Day" or "Day
/ Month" display format.
[SET] Sun / Moon Press [ / MOD ] or [ / NDX ] key to display sunrise / sunset or
moon rise / moon set.
[SET] Hemisphere Press [ / MOD ] or [ / NDX ] key to select North / South
hemisphere for moon phase and wireless sensor array point to
direction.
[SET] Weekday
language
Press [ / MOD ] or [ / NDX ] key to select weekday display
language.
[SET] Exit setting mode
NOTE:
-During the setting, you can back to normal mode by press and hold [ SET ] key for 2 seconds.
-During the setting, press and hold the
[ / MOD ] or [ / NDX ]
key for quick-adjusting the value.
4.5.2 UNIT OF MEASURE SETTING
Press and hold the [ UNIT ] key for 2 seconds to enter the setting mode. Press [ / MOD ] or
[ / NDX ] key to adjust, and press [ UNIT ] key to proceed with next step of the setting. Please
refer to following setting procedures.
Step Mode Setting procedure
[UNIT] Temperature unit Press [ / MOD ] or [ / NDX ] key to select °C or °F
[UNIT] Light unit Press [ / MOD ] or [ / NDX ] key to select Klux, Kfc or W/m
2
[UNIT]
Wind speed unit Press
[ / MOD ]
or
[ / NDX ]
key to select m/s, km/h, knots or
mph
[UNIT] Baro pressure unit Press [ / MOD ] or [ / NDX ] key to select hPa, mmHg or inHg
[UNIT] Rain unit Press [ / MOD ] or [ / NDX ] key to select mm or in
[UNIT]
Distance unit Press
[ / MOD ]
or
[ / NDX ]
key to select km or miles
[UNIT] HCHO unit Press [ / MOD ] or [ / NDX ] key to select ppb or mg/m
3
[UNIT] CO 2 unit Press [ / MOD ] or [ / NDX ] key to select ppm or mg/m
3
[UNIT]
CO Press
[ / MOD ]
or
[ / NDX ]
key to select ppm or mg/m
3
[UNIT] Exit setting mode
NOTE:
-During the setting, you can back to normal mode by press and hold [ UNIT ] key for 2 seconds.
-The PM2.5 / 10, HCHO / VOC, CO 2 and CO sensor are optional sensors, which is not included.