16
3.4.2 SETUP DISPLAY CONSOLE
1. Once the console power up, all the segments of the LCD will be shown.
2. The console will automatically start AP mode and show the "AP" icon on the screen, you can
follow the
Section
5
to setup the WI-FI connection.
Start up screen (with 7-in-1 sensor connected)
NOTE:
If no display appears when power up the console, you can press
[ RESET ]
key by using a pointed object. If
this process still not work, you can remove the backup battery and unplug the adapter then re-power up the
console again.
3.4.3 SYNCHRONIZING WIRELESS 7-IN-1 SENSOR ARRAY
Immediately after power up the console, while still in synchronization mode, the 7-in-1 sensor
can be paired to the console automatically (as indicated by the flashing antenna
). User may
also manually restart the synchronization mode by pressing the
[ SENSOR / WI-FI ]
key. Once
they are paired up, the sensor signal strength indicator and weather reading will appear on your
console display.
3.4.4 DATA CLEARING
During installation of the wireless 7-in-1 sensor, the sensor were likely to be triggered, resulting
in erroneous rainfall and wind measurements. After the installation, user may clear out all the
erroneous data from the display console. Simply press the
[ RESET ]
key once to re-start the
console.
