58
4.3.10.2 TO RESET THE TOTAL RAINFALL RECORD
In normal mode, press and hold
[ RAIN ]
key for 2 seconds to reset all the rainfall record.
NOTE:
Erroneous readings may occur during the installation of the 7-in-1 sensor array. Once the installation is
completed and functioning correctly, it’s advisable to clear all the data and start afresh.
4.3.11
LIGHT INTENSITY, UV INDEX & SUNBURN TIME
This section of display show the sunlight intensity, UV index and sunburn time.
4.3.11.1 LIGHT INTENSITY & SUNBURN TIME MODE:
During light intensity mode, press
[ SUN ]
key to
switch between sunlight intensity and sunburn time
Light intensity mode
Sunburn time mode
UV INDEX VS SUNBURN TIME TABLE
Exposure level
Low
Moderate
High
Very high
Extreme
UV index
1
2
3
4
5
6
7
8
9
10
11
12~16
Sunburn time
N/A
45 minutes
30 minutes
15 minutes
10 minutes
Recommended
protection
N/A
Moderate or high UV level! Suggest to
wear sunglasses, broad brim hat and
long-sleeved clothing.
Very high or Extreme UV level! Suggest to
wear sunglasses, broad brim hat and long-
sleeved clothing, If you have to stay outdoors,
make sure to seek shade.
NOTE:
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker
one's skin is, the longer (or more radiation) it takes to affect the skin.
- The light intensity function is for sunlight detection.
4.3.11.2 UV INDEX MODE
To show the current UV index detected by the outdoor sensor.
4.3.12
MAXIMUM / MINIMUM RECORDS
The console can record MAX / MIN
readings both daily and since last
reset.
Daily MAX
reading
Daily MIN
reading
MAX reading
since last reset
MIN reading
since last reset
4.3.12.1 DAILY AND SINCE MAX / MIN RECORDS
In normal mode, press
[ MAX / MIN ]
key to check the records of the on screen reading in the following
display sequence: daily MAX records
daily MIN records
since MAX records
since MIN records.
4.3.12.2 TO CLEAR THE MAX/MIN RECORDS
Press and hold
[ MAX / MIN ]
key for 2 seconds to reset all the MAX and MIN records.
