49
3.4.2
SETUP DISPLAY CONSOLE
1. Once the console power up, all the segments of the LCD will be shown.
2. The console will automatically start AP mode and show the "AP" icon on the screen, you can follow the
section
6
to setup the WI-FI connection.
Start up screen (with 7-in-1 sensor connected)
NOTE:
If no display appears when power up the console, you can press
[ RESET ]
key by using a pointed object.
If this process still not work, you can remove the backup battery and unplug the adapter then re-power up
the console again.
3.4.3
SYNCHRONIZING WIRELESS 7-IN-1 SENSOR
Immediately after power up the console, while still in synchronization mode, the 7-in-1 sensor can be paired
to the console automatically (as indicated by the flashing antenna
). User may also manually restart the
synchronization mode by pressing the
[ SENSOR / WI-FI ]
key. Once they are paired up, the sensor signal
strength indicator and weather reading will appear on your console display.
3.4.4
DATA CLEARING
During installation of the wireless 7-in-1 sensor, the sensors were likely to be triggered, resulting in
erroneous rainfall and wind measurements. After the installation, user may clear out all the erroneous data
from the display console. Simply press the
[ RESET ]
key once to re-start the console.
3.5 TABLE STAND INSTALLATION
The unit is designed for
desktop or wall mount for easy
viewing. Follow the steps to
hook the table stand on the
bottom of the console.
Step 1
Step 2
EN
