• Technical problems with the device, caused by
a fault, inadequate maintenance or care.
• Defective chimney or ventilation shafts.
• Incorrect airflow, a so-called back draught.
• Incorrect installation of a furnace.
• Chimney of the wrong size, etc.
• Barbecues that are used inside.
4.6 Function check/-test
Important:
The function test must be performed
weekly.
Check to ensure that the green LED blinks on a
cycle of approx. 30 sec. to ensure the detector is
ready for operation.
28
Operating Instructions
CM L 4050
048316 CO-Melder CM L 4050.qxp_048316 BA_CO-Melder CM L