Braviisol LUI HD Скачать руководство пользователя страница 9

Страница: 9 / 81

Parte 1 informazioni Introduttive

2015 Rev.1

1.4 LIMITED WARRANTY—Warranty Statement

IF THE WARRANTY IS NOT INCLUDED IN THE SALES CONTRACT, THE FOLLOWING GUIDELI-

NES APPLY TO THE MACHINE WARRANTY.

The Manufacturer BRAVIISOL SRL warrants that all new units of equipment manufactured and sold by

it conform to the Company latest specifications. Moreover, Mast and hydraulic cylinder carry a Special

Warranty of 10 years. The manufacturer warrants its equipment to the original purchaser against defect

in material and/or workmanship under normal use and service for 3 years from date of registered sale

or date the unit left the factory if not registered. Excluded from such warranty is the battery(s) which car-

ries 1 year warranty from described purchase date. Warranty claims within such warranty period shall

be limited to repair or replacement of the defective part in question. The manufacturer will send, free of

charge, any component recognized as having faulty design or defective construction. The labor to per-

form the necessary repair or replacement and the travel expenses involved carry a warranty of 1 Year

from described purchase date, based on the Manufacturer's then current flat rate.

Warranty claims are valid ONLY providing the defective part in question is shipped prepaid to the Ma-

nufacturer and is found upon inspection by the Manufacturer to be defective in material and/or work-

manship. Furthermore, warranty claims can be

accepted ONLY when all information specifically required by the Manufacturer (such as Serial Number)

are provided.

The manufacturer reserves the right to replace, repair, exchange, or to provide a new, used or rebuilt

component, assembly, sub

assembly, or weldment based on its unquestionable judgment.

This Warranty policy does not cover damages caused by:

Shipment

Misuse of unit, including operation beyond Factory established limits, loads and/or specifications.

Natural disasters (such as flood, fire, wind and lightning)

Failure to properly service and maintain the unit in accordance with the Company manuals or

Factory Service Bulletins.

BRAVIISOL DOES NOT ACCEPT ANY RESPONSIBILITY FOR:

Any part requested for work that was tampered with.

Unauthorized alterations or modifications to the unit carried out without being agreed upon in wri-

ting in advance with the

manufacturer.

Labor on consumable items, such as tire, batteries

Any indirect incidental, consequential or special damage (including without limitation to loss and

profits, loss of revenue, cost of capital, cost of substitute equipment, downtime, examination fees,

claims of third parties, and injury to person or property) based upon any claim of breach of war-

ranty, breach of contract, negligence, strict liability in tort, or any legal theory.

ELECTRICAL COMPONENTS ARE COVERED BY THE WARRANTY UNDER THE FOLLOWING

CONDITIONS

The battery is properly connected for re

charge, according to the specifications of this manual and/or

electrical drawing provided by the Manufacturer.

2020 Rev.01

ART 1

NTRODUCTORY

NFORMATIONS

Содержание LUI HD


















































































Результаты поиска

Содержание LUI HD

Отзывы:

Похожие инструкции для LUI HD

Бренды по названию

Популярные бренды

Braviisol LUI HD, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание LUI HD

Отзывы:

Похожие инструкции для LUI HD

Бренды по названию

Популярные бренды