9.
61
Parte 9 Manutenzione Ordinaria
05
-
2015 Rev.1
9.5 BATTERY TERMINALS CHECK
To proceed with this operation it is necessary to bring the
Platform to the
Zero Power Condition
(Part 2 page 2.16).
9.5.a
The condition of the battery terminals must be checked
every two months.
9.5.b
If the battery terminals are dirty or oxidized, perform the
following actions:
9.5.c
-
For LUI WH 460
-
LUI HD
-
LUI HD WD
-
LUI HD EL
open the hatch using the black pommel.
9.5.d
Loosen the nuts with a 10 mm screwdriver .
9.5.e
Disconnect the terminals and clean them with a cloth
slightly soaked in water.
If the oxide layer is high, remove the surface layer with a
brush .
9.5.f
Dry them thoroughly.
9.5.g
Place them back paying attention to the position of the
positive and negative poles. Then tighten them.
9.5.h
Cover the terminals with protective contact lubricant (such
as pharmaceutical petroleum jelly based lubricant), and
then reconnect them .
9.5.i
Tighten the nuts with a 10 mm screwdriver .
9.5.l
Place and/or close again the cover.
9.5.m
The battery terminals check procedure is finished.
04
-
2020 Rev.01
P
ART 9 ORDINARY MAINTENANCE
