05
-
2015 Rev.1
4.
33
Parte 4 Trasporto e Movimentazio-
4.1 PREMISE TO TRANSPORT AND HANDLING
4.1.a
Danger
of
crushing,
collusion
and
abrasion
The staff in charge of the Platform moving must have read
and understood the safety requirements in lead of this man-
ual (see Part 2).
It should wear work gloves, helmet and safety shoes.
4.1.b
Independently by the number of persons in charge of the
moving of the Platform, there must be always a responsible.
4.1.c
Before transporting the Platform, make sure that the floor is
leveled and without holes.
4.1.d
Before starting, please read all the Part 4 in order to be pre-
pared in time in case of need.
4.1.e
Clean the area where the Platform will be positioned, in or-
der to prevent slipping, tripping or falling.
4.1.f
The Platform can be unloaded in 4 different ways:
1
-
With a forklift with a suitable lifting capacity (see Part 3
Specifications or on marking the voice
“
weight
”)
see Section
4.2.
2
-
By using the loading/unloading device and a suitable set
of ramps, see Section 4.3.
3
-
By using loading and unloading skids and a cargo winch,
see Section 4.4.
4
-
By moving the Platform by a crane, see Section 4.5.
4.1.g
Danger of crushing and capsizing
Transport operations are dangerous, so the operator must
carry out them very slowly, must be very careful and make
sure that there are no exposed people, animals or things.
4.1.h
Danger of pollution
Do not throw away the packing in the environment, but se-
lect it depending on the type of material (cardboard, wood,
steel, polyurethane, etc.
…),
then it must be given for dis-
posal (depending on the rules of the country where the Plat-
form is used).
4.1.i
The Platform is on the truck, please make sure that there
are no pipes or cables that may interfere with the forks.
04
-
2020 Rev.01
P
ART 4 TRANSPORT AND HANDLING
