Braviisol LUI HD Скачать руководство пользователя страница 40

Страница: 40 / 81

2015 Rev.1

Parte 5 Pannello Comandi

CONTROL PANEL AND ITS DESCRIPTION

The ground modules and control boxes can have different positions, personalization or composition,

even divided in different panels or joined in a single block.

The disposition here represented shows the complete versions. In any case, if the command is different

from the scheme represented, there is always written in it the function to which it refers.

NOTE

For further information about the scheme, please refer to the reference scheme of the installed Plat-

form.

PLATFORM CONTROL BOX

Dispositivo bloccaggio ruote:

The wheel locking device is enabled by positioning the selector to the right or pressing the relative but-

ton, thus allowing the vehicle to be driven only along a straight line, both forward and backward.

LED ON indicates that the wheel stop device has been activated.

LED OFF indicates that the device is deactivated allowing, therefore, to drive the vehicle in any direc-

tion.

Mode key Lift/Lower

LED ON means that the lifting/lowering function has been selected.

LED OFF indicates that the lifting/lowering function has not been selected.

Mode key Traction

LED ON indicates that the drive function has been activated.

LED OFF indicates that the drive function has not been activated.

Battery Gauge

This is a 10

bars lighted display which highlighted the state of the battery charge.

A lighted LED refers to the minimum level of the battery charge, while 10 LEDs indicate the fully charge.

5.1 CONTROL PANEL

LUI WH 460;

LUI HD;

LUI HD WD;

LUI HD EL

P5a

2020 Rev.01

ART 5 CONTROL PANEL

Содержание LUI HD


















































































Результаты поиска

Содержание LUI HD

Отзывы:

Похожие инструкции для LUI HD

Бренды по названию

Популярные бренды

Braviisol LUI HD, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание LUI HD

Отзывы:

Похожие инструкции для LUI HD

Бренды по названию

Популярные бренды