4.
36
Parte 4 Trasporto e Movimentazio-
05
-
2015 Rev.1
4.3 PLATFORM LOADING/UNLOADING PRO-
CEDURE BY USING RAMPS AND WINCH
(FOR LUI WH 460; LUI HD; LUI HD WD)
4.3.a
In order to perform the loading/unloading procedure of the Plat-
form by using the ramps and the winch, proceed as follows:
Warning cutting hazard
The operator must wear cut
-
resistant gloves
-
Take a cutter
-
Remove the cellophane making sure not to injure your hands
and not to damage the platform.
•
Warning Slipping Hazard
Remove the cellophane and immediately dispose of it in
the special waste containers.
4.3.b Positioning of unloading ramps
-
Obtain suitable loading and unloading ramps authorized
by the manufacturer in order to support the weight of the
Platform; other types are not authorized (see part 3 Tech-
nical Specifications).
-
Position the loading/unloading ramps and fasten them to
the means of transport by means of a bolt and when possi-
ble between them by using spacers to make the descent
safer and more stable.
-
Warning general hazard
The operator must make sure that:
-
The Platform is completely lowered,
-
There are no people, animals or things exposed in the
maneuvering area,
-
The floor is flat (without holes) and properly cleaned.
4.3.c
Take the winch hook (making sure it is well fixed) and in-
sert it in the appropriate seats on the Platform making sure
that the cable is well pulled.
Release the Stop/Emergency buttons
Q3
and/or
P6
.
4.3.d
Turn the ignition key
Q2
to the right (relative light is on with
the ZAPI system) to enable the controls from below.
Press the two buttons
Q9
and
Q10
simultaneously within
30 seconds until you hear a "CLICK" in order to release
the electric brake, and both the basket and carriage lights
start flashing with the ZAPI system (from this moment the
electric brakes are disabled).
Information will be displayed by means of the TRONIC
system.
4.3.e
Warning overturning hazard
Proceed very slowly on ramps making sure that both
wheels are well guided.
Q2
04
-
2020 Rev.01
P
ART 4 TRANSPORT AND HANDLING
