Brave BRM500, Руководство по эксплуатации и обслуживанию

Страница: 31 / 48

28
Specifications
BRAVE 800-350-8739 www.braveproducts.com
máquina continua de solución de problemas
Pump motor will
not start (motor
hums)
Pump frozen. Machine must be thoroughly
warmed to above freezing.
Defective motor. Call service technician or take
motor to Repair/Warranty station.
Defective water pump. See PUMP SERVICE.
Excessive back pressure. See “Excessive back pressure”
above.
Pump motor starts
slow or overheats
and stops
Low voltage See “Low voltage” below.
Excessive back pressure. See “Excessive back pressure”
above.
Defective motor. Call service technician, or take
motor to Repair/Warranty station.
Pump motor stops
and will not start
Motor starter “kicked out”
(if so equipped) or thermal
overload tripped.
Turn motor starter off to reset,
then turn on, or push thermal
overload reset button on motor.
Excessive back pressure. See “Excessive back pressure”
above.
Defective motor. Call service technician, or take
motor to Repair/Warranty station.
Low voltage Incoming voltage incorrect. Have a qualified technician
check the motor terminal voltage.
Correct voltage is in MODEL
SPECIFICATIONS.
Not large enough
extension cord.
Use an extension cord with
amperes of watts rating as high as
or higher than that or the MODEL
SPECIFICATIONS.
Too long extension cord. Shorten extension cord.
Machine shocks
operator
Machine improperly
grounded.
STOP operating machine. Call
service technician.
Outlet not grounded Have properly wired outlet
installed.