D521-Manual_EN_Rev07 2017_05_26
Page 31 of 31
9
Revision notes
Date
Rev. Modification
06.2008
01
Wiring Hall effect-Sensors modified
06.2009
02
Pulse Output on terminal 20 obsolete
08.2009
03
Pulse Output on terminal 20 reintroduced
04.2011
03
SE-01 description included
10.2011
03
Maximum signal voltage for P01.09 = 2 or 3 limited to 30 V dc
08.12.2011
03
- Hysteresis location "symmetrical" (setting 2) cancelled
- New document design
20.04.2012
03
Parameter P01.09 (sensor monitoring mode) with additional settings 4 and 5 (only effective for
version D521.14)
28.08.2012
03
Terminals for SP3 and SP4 corrected (SP3 ↔ SP4 switched)
07.02.2013
03
Terminal nos of D521 in chapter 7.7 (wiring diagram for A5S1-D461-D521) corrected
Chapter 7.2 modified.
06.05.2013
03
Function diagram : starter input formally inverted (just design)
22.05.2013
03
- Measurement Sequence description page 2: 5 msec
– 9.999 sec
- For Ex-Applications (with A5S1.. and D461) P01.09 must be set to 2.
28.02.2015
04
Latched alarm is reset by : Key
+ Key
28.03.2015
04
Function Diagram modified
01.12.2015
04
Change of directive 2004/108/EG to 2014/30/EU
21.01.2016
05
Note regarding Low Speed Monitoring added in chapter 7.2.2.
Chapter 8 for Safety of Measuring Chain D521-A5S0 resp. D521-D461-A5S1 added
30.03.2016
06
Description of parameter P01.05 modified
26.05.2017
07
Change to Bookmark Format
D 71334 Waiblingen-Hegnach
Esslinger Str. 26
Tel.:
+49 (0)7151/956230
Fax:
+49 (0)7151/956250
E-Mail: [email protected]
Internet: www.braun-tacho.de
Qualität
zertifiziert
nach
ISO 9001
