Branson Krautkramer MIC 10, Руководство пользователя

Страница: 10 / 146

Please always look up in Chapter 13 to see if there
are any current changes. This chapter describes cor-
rections which have been added at short notice and
which are not yet included in the general manual. If
there are no additional corrections, the chapter re-
mains empty.
The operation of the MIC 10 is easy and quick to
learn. In order to be able to use the instrument quickly
you should become acquainted with preparation as
well as the basic functions of the MIC 10. To do this,
read the following chapters carefully:
Chapter 3 Preparations for operation
Here you will find all the steps necessary for applica-
tion of the instrument.
Chapter 4 Basics of operation
This gives you an insight into MIC 10 operation as well
as a few important steps which always reoccur during
operation.
Chapter 5.1 Hardness measurement
All operation steps are shown which are required dur-
ing the measurement procedure.
Chap. 5.2 Data storage (only for MIC 10 DL)
The MIC 10 base instrument does not have these function-
s. You learn how to store data, to display, change and
delete stored data. Using the special Memory Card you
can reload stored instrument settings into the MIC 10.
Chapter 6 Configuration
This gives you information about additional possi-
bilities concerning instrument adjustment.
Chapter 7 Documentation (only for the MIC 10 DL)
You can document the measurement readings via a
printer or transfer them to a computer using special
software and evaluate them there. Various possibilities
are available for your printouts.
Chapter 10 Interfaces and peripherals
(only for MIC 10 DL)
In this chapter you learn about connecting the MIC 10
to a computer or printer. You can remote control the in-
strument via a computer.
Chapter 12 Appendix
The appendix supplies you with information about con-
version of hardness values into other scales, the UCI
method, the treatment of test materials as well as the
statistical evaluation of the measurement results.
Introduction
Information on these instructions
1-4 Issue 08, 08/01 Krautkrämer MIC 10
Please always look up in Chapter 13 to see if there
are any current changes. This chapter describes cor-
rections which have been added at short notice and
which are not yet included in the general manual. If
there are no additional corrections, the chapter re-
mains empty.
The operation of the MIC 10 is easy and quick to
learn. In order to be able to use the instrument quickly
you should become acquainted with preparation as
well as the basic functions of the MIC 10. To do this,
read the following chapters carefully:
Chapter 3 Preparations for operation
Here you will find all the steps necessary for applica-
tion of the instrument.
Chapter 4 Basics of operation
This gives you an insight into MIC 10 operation as well
as a few important steps which always reoccur during
operation.
Chapter 5.1 Hardness measurement
All operation steps are shown which are required dur-
ing the measurement procedure.
Chap. 5.2 Data storage (only for MIC 10 DL)
The MIC 10 base instrument does not have these function-
s. You learn how to store data, to display, change and
delete stored data. Using the special Memory Card you
can reload stored instrument settings into the MIC 10.
Chapter 6 Configuration
This gives you information about additional possi-
bilities concerning instrument adjustment.
Chapter 7 Documentation (only for the MIC 10 DL)
You can document the measurement readings via a
printer or transfer them to a computer using special
software and evaluate them there. Various possibilities
are available for your printouts.
Chapter 10 Interfaces and peripherals
(only for MIC 10 DL)
In this chapter you learn about connecting the MIC 10
to a computer or printer. You can remote control the in-
strument via a computer.
Chapter 12 Appendix
The appendix supplies you with information about con-
version of hardness values into other scales, the UCI
method, the treatment of test materials as well as the
statistical evaluation of the measurement results.
Introduction
Information on these instructions
1-4 Issue 08, 08/01 Krautkrämer MIC 10