Branson Krautkramer MIC 10, Руководство пользователя

Страница: 115 / 146

LO - Read / set lower threshold
Syntax: <ESC>LO
[ (n [.m] [ (HV | HRC| HRB | HB | N/MM2 ) ] | ON |
OFF) ]<CR>
Description:
Set the lower threshold value or read the active set-
ting. If a hardness scale is not given, the active scale
will be assumed. The lower threshold is deactivated
when set to
OFF . Subsequent setting to ON activates
the lower threshold again. The threshold value is the
last one which was set.
Example:
<ESC>LO 380HV<CR> Lower threshold: 380 HV
<ESC>LO<CR>
Read status:
380HV<CR><LF> Result: 380 HV
<ESC>LO OFF<CR> Lower threshold not active
<ESC>LO<CR> Read status:
OFF<CR><LF> Result: not active
<ESC>LO ON <CR> Activate lower threshold
again
<ESC>LO<CR> Read status:
380HV<CR><LF> Result: 380 HV
)
Warning:
When you set the lower threshold, the active measure-
ment set will be terminated beforehand.
MR - Data Logger access
Syntax: <ESC>MR [n]<CR>
Description:
If a valid file number is given as a parameter, the MIC
10 DL will issue the contents of the measurement set
in the selected report printout format. On recall without
parameter, the number of the stored measurement set
is returned.
Example:
<ESC>MR<CR> Read file number:
3<CR><LF> Result: 3
<ESC>MR 3 <CR> Request file No. 3
Data transfer with a PC
Interface and peripherals (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 11-15
LO - Read / set lower threshold
Syntax: <ESC>LO
[ (n [.m] [ (HV | HRC| HRB | HB | N/MM2 ) ] | ON |
OFF) ]<CR>
Description:
Set the lower threshold value or read the active set-
ting. If a hardness scale is not given, the active scale
will be assumed. The lower threshold is deactivated
when set to
OFF . Subsequent setting to ON activates
the lower threshold again. The threshold value is the
last one which was set.
Example:
<ESC>LO 380HV<CR> Lower threshold: 380 HV
<ESC>LO<CR>
Read status:
380HV<CR><LF> Result: 380 HV
<ESC>LO OFF<CR> Lower threshold not active
<ESC>LO<CR> Read status:
OFF<CR><LF> Result: not active
<ESC>LO ON <CR> Activate lower threshold
again
<ESC>LO<CR> Read status:
380HV<CR><LF> Result: 380 HV
)
Warning:
When you set the lower threshold, the active measure-
ment set will be terminated beforehand.
MR - Data Logger access
Syntax: <ESC>MR [n]<CR>
Description:
If a valid file number is given as a parameter, the MIC
10 DL will issue the contents of the measurement set
in the selected report printout format. On recall without
parameter, the number of the stored measurement set
is returned.
Example:
<ESC>MR<CR> Read file number:
3<CR><LF> Result: 3
<ESC>MR 3 <CR> Request file No. 3
Data transfer with a PC
Interface and peripherals (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 11-15