Brainlab KICK 2 Скачать руководство пользователя

Страница: 68 / 136

6.3.2

Disassembling and Transporting the Monitor Cart

Before You Begin

Consider the weight of the components before beginning assembly and disassembly.

Apply protection cover over monitor before disassembly.

During assembly and disassembly, system components should only be lifted by people who are
bodily able (e.g., not by pregnant women).

How to Prepare the Monitor Cart for Transport

Step

Shut down the system.

Unplug mains power cable and disconnect cable from the

Monitor Cart

Remove all other attached cables and components (e.g., PE cable, network cable, DVD
drive).

Store cables in the front pocket of the shoulder bag.

Disconnect the monitor cable from the monitor.

Press the release trigger on the monitor handle and remove the monitor from the post.

Place the monitor into the corresponding case.

Pull the monitor cable clip backwards to disconnect the cable from the post.

Gently pull the cable out of the post channel.

Pull up on the post fixation lever and remove the post from the

Monitor Cart

base.

Place the post into the shoulder bag.

Place the

Monitor Cart

base into the corresponding case.

Cover the metal connector of the monitor cable with the cloth bag provided.

Fully close the zipper of the transport case.

How to Transport the Monitor Cart Base

①

②

Figure 30

Step

Cover the metal connector of the monitor cable with the cloth bag

②

provided.

With the top foam insert flipped up, insert the

Monitor Cart

base into the case.

Disassembling and Transporting the Monitor Cart

System and Technical User Guide Rev. 1.0 Kick 2 Navigation Station Ver. 1.1

Содержание KICK 2








































































































































Результаты поиска

Содержание KICK 2

Отзывы:

Похожие инструкции для KICK 2

Бренды по названию

Популярные бренды

Brainlab KICK 2, Системное и техническое руководство пользователя

Результаты поиска

Содержание KICK 2

Отзывы:

Похожие инструкции для KICK 2

Бренды по названию

Популярные бренды