Brainlab KICK 2 Скачать руководство пользователя

Страница: 28 / 136

2.4

Proper System Handling

Risk of Electrical Shock

Ensure that the system is set up in a way that the mains power plugs are easily accessible. In an
emergency, unplug the mains power cable.

Warning

Never touch the patient and any system parts or electrical interfaces at the same time, due
to possible electrostatic discharge.

Warning

The system may not be connected to multiple socket-outlets or extension cords.

Warning

To avoid the risk of electric shock, this monitor cart and camera cart must only be
connected to a supply mains with protective earth.

Moving Parts

Figure 1

Warning

Take care to not pinch fingers or other body parts in any movable system parts, including,
but not limited to joints marked with the above warning symbol.

Modification

Warning

No modification of this equipment is allowed.

Restrictions to Environment

System components are not suitable for use in the presence of flammable anesthetic mixtures
containing air, oxygen or nitrous oxide.

Tipping Hazard

Warning

Do not lean against the device. It may tip over.

Proper System Handling

System and Technical User Guide Rev. 1.0 Kick 2 Navigation Station Ver. 1.1

Содержание KICK 2








































































































































Результаты поиска

Содержание KICK 2

Отзывы:

Похожие инструкции для KICK 2

Бренды по названию

Популярные бренды

Brainlab KICK 2, Системное и техническое руководство пользователя

Результаты поиска

Содержание KICK 2

Отзывы:

Похожие инструкции для KICK 2

Бренды по названию

Популярные бренды