background image

2

S19-260

 Installation

10/22/2012 

Bradley฀•฀

215-770 Rev. L; ECN 12-05-003C

IMPORTANT

Read this installation manual completely to ensure proper installation, then file it with the 

owner or maintenance department. Compliance and conformity to drain requirements and 
other local codes and ordinances is the responsibility  of the installer.

Separate parts from packaging and make sure all parts are accounted for before discarding 

any packaging material. If any parts are missing, do not begin installation until you obtain 
the missing parts.

Flush the water supply lines before beginning installation and after installation is complete. 

Test the unit for leaks and adequate water flow. Main water supply to the eye/face wash 
should be “ON” at all times. Provisions shall be made to prevent unauthorized shutoff.

The ANSI Z358.1 standard requires an uninterrupted supply of flushing fluid. Bradley 

plumbed emergency fixtures require a minimum of 30 PSI (0.21 MPa) flowing pressure. 
Flushing fluid should be tepid per ANSI Z358.1.

The inspection and testing results of this equipment should be recorded weekly to verify 

proper operation. This equipment should be inspected annually to ensure compliance with 
ANSI Z358.1.

Workers who may come in contact with potentially hazardous materials should be trained 

regarding the placement and proper operation of emergency equipment per ANSI Z358.1.

For questions regarding the operation or installation of this product, visit www.bradleycorp.

com or call 1-800-BRADLEY. 

Product warranties may also be found under “Products” on our web site at 

www.bradleycorp.com.

Installation

THIS
SIDE

UP

Packing List

P.O

. Bo

x 309,

 Menomonee F

alls,

 WI 53051

R

TEST 

THIS 

UNIT EA

CH 

WEEK

Test-operate v

alv

e(s) eac

h week and sign 

belo

w.

Repor

t an

y malfunctions immediatel

y.

Ventil(e) w

öc

hentlic

h im 

Testbetrieb prüf

en,

 bestätigt 

dur

ch Unter

sc

hrift.

 Jeglic

he Störung sof

or

t melden.

 

Date

Datum

Date

Signed

Unter

sc

hrift

Signe

Date

Date

Date

Signed

Signed

Signed

DIESES GERÄ

T 1ST 

W

ÖC

HENTLICH ZU 

PR

ÜFEN.

ESSAI HEBDOMA

DAIRE

Test le f

onctionnement des v

alves

 c

haque semaine et 

signe en bas.

 S'il y à quelqu

ch

ose qui ne v

a pas fait  

un rappor

t immédiatement.

 

P.O. BOX 309, MENOMONEE FALLS, WI 53052-0309 USA

TEL: 1-800-BRADLEY    FAX: (262-251-5817)

http://www.bradleycorp.com

114-051

Содержание S19-260











Отзывы: