AV90
Installation
14
1/21/2014
Bradley
• 215-1773 Rev. D; ECN 13-08-028
AV30 is shown. AV90 is similar.
The dryer hood is factory-installed. For
clarity, the basin, soap assembly and
faucet assembly are not shown.
To Reinstall the Dryer Hood Cover
5
Dryer Plenum Air Hose Assembly
A
Position the dryer hood
cover tabs into the dryer
hood base pockets.
B
Secure the cover to the
base with the two #10 x
³⁄₈
" screws. Use
¹⁄₈
" hex
driver to remove screws.
A
Orient worm gears
to sides so that dryer
hood can be closed.
Dryer Hood
Dryer Hood
Cover Tab
Dryer Hood
Base Pocket
A
Remove (2) #10 x 1½"
screws (use
¹⁄₈
"
Hex
Driver) and lift cover up
and back to remove.
C
Attach air hose from right upper dryer
plenum thru dryer hood base opening
and down to dryer motor assembly inlet.
B
Attach air hose from left upper
dryer plenum thru dryer hood
base opening and down to
lower dryer plenum.
Upper Dryer Plenum
Air Hose (Attached
by Bradley)
Dryer Hood
Base Opening
Remove Dryer
Hood Cover