background image

Installation and Operation instructions

INDOOR MODEL

RTG 199 HE

Warning:

 If the information in this manual is not followed exactly, a fire 

or explosion may result causing property damage, personal injury or 
death.
Do not store or use gasoline or other flammable vapors and liquids in the 
vicinity of this or any other appliance.
Installation and service must be performed by a trained and certified 
installer, service agency or the gas supplier.

Improper installation, adjustment, alteration, service or maintenance 
can cause injury or property damage. Refer to this manual. For assis-
tance or additional information consult a qualified installer, service 
agency or the gas supplier.

In the Commonwealth of Massachusetts this product must be installed 
by a licensed plumber or gas fitter.

Upon completion of the installation, these instructions should be 
handed to the user of the appliance for future reference.

What to do if you smell gas

• Turn off the gas shut-off valve. Open windows and doors.
• Do not try to light any appliance.
• Do not touch any electrical switch, telephone, and do not use out-

lets.

• Extinguish all open flames. Do not smoke! Do not use lighters!
• Warn all occupants of the building. Do not ring doorbells!
• If you can hear gas leaking, leave the building immediately. Prevent 

others from entering the building and notify the police and fire 
department from outside the building.

From outside the building, call the gas utility company and a trained 
and certified installer.

RTG 199 HEN - Natural Gas
RTG 199 HEX - Propane (LP Gas)

Temperature Modulated with Electronic Ignition Suitable for heating potable water and space heating 

(Intended for variable flow applications)

6 720 811 617 / 238-50793-00B (

2016/01)

Содержание RTG 199 HEN

























































Отзывы: