Bradford White mi5036en10, Инструкция по установке и эксплуатации

Страница: 13 / 14

25
PARTS LIST AND DRAWING
PART NAME AND DESCRIPTION
1. Draft Diverter 15. Jacket
2. Flue Core Assembly (Certain Models) 16. Combustion Chamber
3. Jacket Head Pan 17. Radiation Shield
4. Fiberglass Head Insulation 18. Combustion Chamber Door
5. Flue Baffle Assembly 19. Jacket Base Pan
6. Magnesium Anode - Hot Water Outlet 20. Heater Leg
26
7. Dip Tube - Cold Water Inlet 21. Thermocouple Lead
8. Temperature and Pressure Relief Valve 22. Gas Feedline to Pilot
9. Glass Lined Tank 23. Gas Feedline to Burner
10. Foam Insulation 24. Orifice
11. Thermostat with ECO 25. Air Shutter (Cast Iron Burner Only)
12. Drain Valve 26. Cast Iron Burner
13. Fiberglass Insulation 27. Pilot Assembly
14. Outer Door (Varies by Model) 28. Steel Burner (Varies by Model)
THE FOLLOWING INSTRUCTIONS ARE FOR INSTALLATION OF:
GAS WATER HEATERS
SUITABLE FOR WATER (POTABLE) HEATING AND SPACE
HEATING
1. All piping components connected to this water heater for space heating
applications must be suitable for use with potable water.
2. Toxic chemicals, such as those used for boiler treatment, must not be
introduced into potable water used for space heating.
3. This water heater must not be connected to an existing heating system
or component(s) previously used with a non-potable water heating
appliance.
4. When the system requires water for space heating at temperatures higher
than required for other means, such as a tempering valve shall be
installed to temper the water for those uses in order to reduce the scald
hazard potential.
Please refer to the illustrations for suggested piping arraignments.