18
Cleaning, maintenance and repair
Sprühboy 14 Airmix Edition 05.07
- Separate the compressed air supply from the
external compressed air source. Refer to chapter
"Adjusting the agent and spraying pressure", page
in this regard 13.
- Pull the bleed valve until the hissing noise stops.
Refer to chapter "Filling the stainless steel
pressure vessel", page 12.
- Put down the agent hose with the spray gun (1) in
a safe place.
- Open the pressure vessel cover once the
stainless steel pressure vessel is unpressurized.
Refer to chapter "Filling the stainless steel
pressure vessel", page 12 in this regard.
- Empty the stainless steel pressure vessel.
- Fill the stainless steel pressure vessel with hot
rinsing water and disinfecting cleaning agent.
- Reseal the stainless steel pressure vessel with the
pressure vessel cover.
- Vigorously shake the stainless steel pressure
vessel.
- Empty the stainless steel pressure vessel.
- Dispose of the cleaning residues in an
environmentally compatible manner.
- Refill the stainless steel pressure vessel with
approx. 5 litres of hot rinsing water and
disinfecting cleaning agent.
- Reseal the stainless steel pressure vessel with the
pressure vessel cover.
- Connect the compressed air supply (1) with the
external compressed air source.
- Turn the turning knob (2) to adjust the spraying
pressure anti-clockwise, until the manometer
pointer (3) shows a spraying pressure of 0 bar.
- Afterwards, spray the entire contents of the
stainless steel pressure vessel into a collecting
basin. Agent hose and spray gun are cleaned
through this.
- Afterwards, fill the stainless steel pressure vessel
once more with clear rinsing water.
- Rinse the entire system with the clear rinsing
water.
- Afterwards, clean the spray gun's air- and agent-
nozzle.
1
2
3
1
