background image

14

 

Putting into operation 

 

Sprühboy 14 Airmix Edition 05.07 

 

-  Afterwards, turn the turning knob (1) until the

manometer pointer (2) shows a spraying pressure
of between 0.5 and 2.0 bar. 

 

4.3 

The spraying procedure 

 

 

 

Only spray aiming at the baking tins or
baking trays, never aiming at people or
animals. 

 

 

Only carry out the spraying procedure
with firmly tightened air nozzle (1). 

 

 

 

During the spraying procedure, the
Sprühboy 14 Airmix must be
permanently connected with the external
compressed air source as otherwise,
spraying will not be possible. 

 

 

 

One distinguishes between the following spraying
procedures 

 

rotary spraying and 

 

flat- or wide spraying. 

Rotary spraying: 

-  For rotary spraying guide the spray gun in circular

movements over the baking tins or baking trays. 

Flat spraying: 

-  For flat spraying guide the spray gun in left and

right hand swivelling movements above the baking
tins and/or baking trays. 

Spraying baking tins and/or baking trays: 

-  Hold the spray gun at a distance of approx. 10 cm

directly above the baking tin and/or baking tray. 

-  Pull the spray gun trigger (2) and spray the baking

tin and/or baking tray. 

Interrupting the spraying procedure: 

-  Release the trigger. The agent immediately stops

discharging from the spray gun. 

 

 

 

Содержание Spruhboy 14 Airmix




























Отзывы: