BOXLIGHT MP-56t, Руководство пользователя

Страница: 43 / 48

43
APPENDIX
Remote Control does
not work.
●
Check the batteries.
●
Check ALL-OFF switch on Remote Control is set to “ON.”.
●
Make sure nothing is between Infrared Remote Receiver and Remote Control.
●
Make sure you are not too far from a projector when using Remote Control.
Maximum operating range is 16.4’ (5m).
●
Make sure the code of Remote Control is set to conform to projector.
(See “SETTING” section on page 36, 37.)
Problem: Try these Solution
Wireless Mouse
function does not
work.
●
Check cable connection between the projector and your computer.
●
Check the mouse setting on your computer.
●
Turn the projector on before turning on the computer.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
SERVICE
WARNING: High voltages are used to operate this projector. Do not attempt to open the cabi-
net.
Boxlight Service is easily obtained. If after following instructions above, you find that service is necessary, con-
tact Boxlight for assistance at 1-800-762-5757 or 360-779-7901.
Give the model number and explain the difficulty. We will advise you how to obtain service.
Please have the following information available:
●
Serial Number of Projector.
●
Resolution of Computer.
●
Refresh rate of Computer.