BOXLIGHT MP-56t, Руководство пользователя

Страница: 25 / 48

25
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your
computer. Auto PC Adjustment function can be operated as follows.
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to PC ADJUST. 1
2 Press POINT DOWN to move the red frame pointer to AUTO PC
Adj. and then press SELECT twice.
This Auto PC Adjustment can be also executed by pressing
AUTO PC ADJ. on Top Control or on Remote Control.
Move a red frame pointer to AUTO PC
Adj. icon and press SELECT.
PC ADJUST MENU
Auto PC Adj.
PC ADJUST Menu icon
Store adjustment parameters.
Adjustment parameters from Auto PC Adjustment can be memorized
in this projector. Once parameters are memorized, the setting can be
recalled just by selecting that Mode from the PC SYSTEM Menu
(P23). Refer to step 3 of MANUAL PC ADJUSTMENT section (P27).
NOTE
●
Fine sync, Total dots and Picture Position of some computers can
not be fully adjusted with the Auto PC Adjustment function. When
the image is not displayed properly through this function, manual
adjustments are required. (Refer to page 26, 27.)
●
The Auto PC Adjustment function cannot be selected for Digital
Signal inputs on the DVI terminal or if “RGB”, “1035i (HDTV)”,
“1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on the PC
SYSTEM Menu (P23).