BOXLIGHT MP-56t, Руководство пользователя

Страница: 10 / 48

10
PREPARATION
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
●
Do not drop or bump the projector, damage and malfunctions may result.
●
When carrying the projector, use a suitable carrying case.
●
Do not transport the projector using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, consult your dealer for more
information.
MOVING PROJECTOR
CAUTION
The supplied Dust Cover is intended for protection from dust and
scratches on the surface of the projector, it is not designed to
protect the projector from impact. Do not transport the projector
through a courier or transport service with this cover, the projector
will be damaged. When handling the projector, do not drop, bump,
or subject the projector to strong forces. Do not stack or place
items on top of the projector.
Use the Carry Handle when moving the projector.
Replace the Lens Cover and retract the Adjustable Feet to prevent
damage to the lens and cabinet.
When the projector will not be used for an extended period, put it
into the case (dust cover) supplied with the projector.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted up to 10
degrees.
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector. 1
ADJUSTABLE FEET
FEET LOCK
LATCHES
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET. Rotate the ADJUSTABLE FEET to fine
tune position and tilt. 2
To retract the ADJUSTABLE FEET, lift the front of the
projector and pull the FEET LOCK LATCHES.
Keystone distortion of the image can be adjusted using the
On Screen Menu. (Refer to P20 and 36.) 3
NOTE :
DO NOT TILT THE PROJECTOR MORE THAN 10 DEGREES.
EXCESSIVE ANGLES CAN CAUSE THE PROJECTION LAMP
TO MALFUNCTION.