21
Network/COM
Network Configuration:
Automatic IP Configuration (DHCP)
– Use this setting to have this device request an IP address from a DHCP server; this
should be enabled only if the IT department has a DHCP server online and has set up static (fixed) IP address reservations for
FrontRow devices; otherwise manually enter the IP address reserved for the device in the IP Address field . It is highly recom-
mended that static IP addresses be used .
IP Address
- The field displays and also enables entering (changing) the IP address for the device . While the default address is
192 .168 .1 .103, you must use the address provided by the IT department and ensure that each device has a unique address .
IP Subnet Mask
- Provided by the IT department; if used as part of a Conductor system, the subnet mask must be
255 .255 .255 .0 .
Router IP Address
- Required when this device is in a network in which router switches determine connectivity across subnets .
Provided by the IT department .
Primary NameServer IP Address
- Optionally provided by the IT department . Rarely used with this device, only enter an IP
address here if specifically requested by the IT department .
Secondary NameServer IP
- Optionally provided by the IT department . Only enter an IP address here if specifically requested
by the IT department .
Current Remote Management (CNAP) Port
- Under rare conditions, it may be necessary to change the network communica-
tion ports used by other devices and software to communicate with this device . If a such a change is necessary, please direct
your browser to the /cfg/advanced .htm page for this device and refer to the help there .