BOXER KING 5600, Руководство по обслуживанию

Страница: 107 / 140

Service Manual 04/2010 Rev.B
107
Fig.239
Remove the saddle from the cabinet and
replace its plastic slides (Fig.240) by removing
the 8mm screws shown by the arrows in
Fig.241.
SADDLE IS VERY HAEVY AND
IT MUST BE HANDLEDED WITH
DECISION. ITS DROPPING MAY
CAUSE FEET INJURIES.
Fig.240
Fig.241
Grease both guides welded on the cabinet by
using black grease.
Mount the saddle on the cabinet.
Mount the pin #5 ( 6.9 Fig.177 and 178).
Mount all bars with slides by tightening the
screws and the eccentrics by hands only.
IMPORTANT! THE BARS HAVE THE FIRST
HALF OF THE 10mm THREADED HOSES
LARGER THAN THE SECOND ONE (Fig.242).
THE LARGEST SIZE MUST BE KEPT TOWARD
THE ECCENTRICS.
Fig.242
Turn the machine on and position the saddle
in the middle of the cabinet.
Turn the eccentrics #1 and #2 (Fig.243) up to
the point you find resistance (without forcing)
and lock the screws. Perform the same
operation with eccentrics #3 and #4 (Fig.235)
and #5 and #6 (Fig.244).
Fig.243