BOXER KING 5600, Руководство по обслуживанию

Страница: 103 / 140

Service Manual 04/2010 Rev.B
103
Remove the greasers #3 and #4 (Fig.224 and
Fig.226)
Remove the screw #5 (Fig.226).
Fig.226
Take the new cylinder.
Install the greasers #3 and #4 (Fig.224 and
226).
Install the cylinder on its cabinet with the shim
in the original position (Fig.226).
Lock the cylinder pin by screw and nut #
(Fig.224).
NOTE: THE HOLE IN THE PIN #2 MUST
MATCH WITH THE SCREW #1 (FIG.224).
Install the nipless fittings and the oil hoses
(Fig.223).
Turn on the machine.
Open the cylinder.
Install the cylinder on the hook with the pin #6
(Fig.222).
NOTE: THE HOLE IN THE PIN #6 MUST
MATCH WITH THE SCREW #5 (FIG.222).
Lower the hook completely ‘till end of cylinder
stroke.
IMPORTANT!
If the hook reaches the end of stroke before
the cylinder piston (Fig.227), remove the pin
#6 (Fig.222) and turn clockwise of a turn the
piston rod head (Fig.229).
Fig.227
If the cylinder piston reaches the end of stroke
before the hook (Fig.228), remove the pin #6
(Fig.222) and turn counter clockwise of a turn
the piston rod head (Fig.229).
Fig.228
Fig.229
Mount the cylinder on the hook and verify if
both parts reach the end of their stroke at the
same time.
Lock the screw #5 (Fig.222) FIRMLY by
loctite.