Bowflex Max Trainer M7 Скачать руководство пользователя

Страница: 13 / 139

Contact Customer

Care for Advanced

Troubleshooting

YES

Needle will Not Move or Machine Goes to Sleep While in Use

BEGIN HERE

Replace the Speed

Sensor Assembly

Issue resolved.

YES

Does the issue

persist?

Is the sensor wire

unplugged from the

main wire harness?

Rotate the fan so that one of the

magnets meets the tip of the

sensor. Adjust the sensor so

that there is an 1/8 inch (3mm)

gap between the sensor and the

magnet (about the thickness of

2 pennies held together).

Plug the power back in and test

the machine.

YES

Is the sensor

damaged?

Issue resolved.

The speed sensor is located at

the front of the frame pointing at

the fan. Look closely at the tip of

the sensor and check for any

damage.

Remove the hardware from the

right lower round cover. To

remove the right lower round

cover, the power plug inlet wire

must be gently released from

the inside of the cover.

Once the power plug inlet wire

is released, remove the cover

from the machine.

YES

Содержание Max Trainer M7












































































































































Результаты поиска

Содержание Max Trainer M7

Отзывы:

Похожие инструкции для Max Trainer M7

Бренды по названию

Популярные бренды

Bowflex Max Trainer M7, Руководство по обслуживанию

Результаты поиска

Содержание Max Trainer M7

Отзывы:

Похожие инструкции для Max Trainer M7

Бренды по названию

Популярные бренды