Bowflex Max Trainer M7 Скачать руководство пользователя

Страница: 106 / 139

106

1. Unplug the AC Adapter from the wall outlet and machine.

2. Remove the Right Stabilizer Shroud from the machine.

3. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws

and only loosen the lowest indicated screw (arrow) from the Right Fan

Cover.

Note:

Loosen the lowest screw by at least 3 full rotations.

4. The Right Fan Cover has a tab that needs to be pushed upward to clear

the loosened screw. While pushing up on the tab, remove the Right Fan

Cover from the assembly.

Note:

the Power Cable is attached to the inside of the Right Fan Cover.

Be sure not to crimp the cable by placing the Right Fan Cover close to the

front of the machine.

To assist with assembly, note that the upper screw is a machine screw

and not a self-tapping screw.

Power Inlet

Содержание Max Trainer M7












































































































































Результаты поиска

Содержание Max Trainer M7

Отзывы:

Похожие инструкции для Max Trainer M7

Бренды по названию

Популярные бренды

Bowflex Max Trainer M7, Руководство по обслуживанию

Результаты поиска

Содержание Max Trainer M7

Отзывы:

Похожие инструкции для Max Trainer M7

Бренды по названию

Популярные бренды