manualshive.com logo in svg

Bowflex Lateralx LX5, Руководство по обслуживанию

Bowflex Lateralx LX5 - инновационный тренажер для тренировки боковых мышц и кардио. Для сборки и использования, загрузите "Assembly And Owner'S Manual" на manualshive.com бесплатно. Получите подробное руководство по эксплуатации и сборке, чтобы насладиться всеми преимуществами этого устройства.

Поделиться
Скачать
background image

117

Replace the Pedal Arms and Pedal Shrouds  

on the Bowflex

™

 LateralX

™

 LX5/LX5i  

Lateral Trainers

Skill Level: II

8024433.091519.A

Replacement Procedure

NOTICE:  

7KLVGRFXPHQWSURYLGHVLQVWUXFWLRQVIRUWKHUHSODFHPHQWRIWKH3HGDO$UPVDQG3HGDO6KURXGVRQWKHRQWKH%RZÀH[

™

/DWHUDO;

™

/;DQG/;L/DWHUDO7UDLQHUV

If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside 

86&DQDGD7R¿QG\RXUORFDOGLVWULEXWRUJRWRZZZQDXWLOXVLQWHUQDWLRQDOFRP

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all 
Warnings on this machine.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and under-
stand all Warnings on this machine.

Disconnect all power to the machine before you service it.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause 
injury to the service technician or bystanders. 
• Keep bystanders, children and pets away from the product being serviced at all times. 

‡0DNHVXUHWKDWWKHUHSDLULVGRQHLQDQDSSURSULDWHZRUNVSDFHDZD\IURPIRRWWUDI¿FDQGH[SRVXUHWRE\VWDQGHUV

 

• Disconnect all power and allow to sit for 5 minutes before you service this machine. 
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these 
components. Do not try to do heavy or awkward steps on your own. 
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a 
risk to users, keep the machine from operating correctly and will void the warranty.
•

Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or 

replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact 
Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.

• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

™

™

Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in 

&KLQD_‹1DXWLOXV,QF_%RZÀH[WKH%ORJRDQG/DWHUDO;DUHWUDGHPDUNVRZQHGRUOLFHQVHGE\1DXWLOXV,QFZKLFKDUHUHJLVWHUHGRURWKHUZLVHSURWHFWHGE\FRPPRQODZLQWKH8QLWHG6WDWHVDQGRWKHUFRXQWULHV_

 

ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Tools Required (not included)

PPKH[ZUHQFK 

PPKH[ZUHQFK 

 
 

 

 

 

 

 

 

 

#2 

Phillips 

screwdriver 

     

 

 

 

 

 

 

 

  

Содержание Lateralx LX5










































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lateralx LX5

Spirit EL7 Owner'S Manual preview
EL7
Бренд: Spirit Страницы: 28
GREEN SERIES FITNESS CIR-EL7000-G1 Owner'S Manual preview
CIR-EL7000-G1
Бренд: GREEN SERIES FITNESS Страницы: 31
ProForm PFEL53907.0 User Manual preview
PFEL53907.0
Бренд: ProForm Страницы: 24
Insportline IN 3585 User Manual preview
IN 3585
Бренд: Insportline Страницы: 61
SPORTSTECH LCX800 User Manual preview
LCX800
Бренд: SPORTSTECH Страницы: 188
Xterra FS220e Owner'S Manual preview
FS220e
Бренд: Xterra Страницы: 20
Johnson JAR-5100 Service Manual preview
JAR-5100
Бренд: Johnson Страницы: 79
Laufband PROSPORT XPC 700 Instruction Manual preview
PROSPORT XPC 700
Бренд: Laufband Страницы: 21
Orbit Phoenix CDXP User Manual preview
Phoenix CDXP
Бренд: Orbit Страницы: 28
SteelFlex ELLIPTICAL XE-7400 User Manual preview
ELLIPTICAL XE-7400
Бренд: SteelFlex Страницы: 42
SteelFlex PST10 User Manual preview
PST10
Бренд: SteelFlex Страницы: 52
ICON PRO-FORM ZE3 User Manual preview
PRO-FORM ZE3
Бренд: ICON Страницы: 28
Nautilus EV916 Owner'S Manual preview
EV916
Бренд: Nautilus Страницы: 41
WilTec 62712 Operation Manual preview
62712
Бренд: WilTec Страницы: 10
Precor EFX 600 Line Assembly Manual preview
EFX 600 Line
Бренд: Precor Страницы: 4
Precor Discovery DSL 621 Getting Started Manual preview
Discovery DSL 621
Бренд: Precor Страницы: 2
Precor AMT 813 Brochure & Specs preview
AMT 813
Бренд: Precor Страницы: 4
Precor EFX 5.21i Owner'S Manual preview
EFX 5.21i
Бренд: Precor Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды