- 6 -
y
Advice :
-
maintain stainless steel surfaces clean and dry. Ensure there is a sufficient flow of air.
-
clean daily to remove scale, grease and any food residue. Corrosion can form under these layers by lack of air inlet.
-
daily cleaning can be performed with a damp cloth. If necessary :
*
* use soapy water, cleaning products with low chloride content, javel-free detergents, window degreasers.
*
* remove hard stains with a non metallic brush (plastic material, natural bristles or stainless steel wool).
-
do not scratch the surfaces with metals other than stainless steel, and more particularly, never use iron brushes.
-
remove fresh rust stains with soft abrasive agents or fine emery cloth.
-
for larger stains, use hot oxalic acid with a 2-3% concentration. If necessary, apply a treatment with nitric acid concentrated
at 10%.
After treatment, wash thoroughly with water and wipe.
The use of acid is reserved to skilled persons and complying with regulations.
y
Product to ban :
-
Javel water and chlorine based products
-
hydrochloric acid
-
iron oxide abrasive powders.
y
Control button : Clean carefully using a sponge and soapy water only.
SERVICE
y
Refer to an After Sales Service for all servicing operations.
This equipment carries the recycling symbol in accordance with Directives 2002/95/CE and 2002/96/CE relating to
Waste Electrical or Electronic Equipment (DEEE or WEEE) At the end of its working life the equipment should be recy-
cled in accordance with the regulations that are in force in the country of its installation.
Содержание GN1/1
Страница 2: ... 2 ...
