Bottoms Up Beer BEER BUDDY, Инструкция по эксплуатации

Страница: 38 / 44

14
Changing a keg
Remove the drip plate and the drip tray.
Lift the keg and dispenser out of the container and place them on a secure, flat
surface.
Now close the pressure regulator. To do this, turn the pressure regulator anti-
clockwise until it stops.
Next, for your own safety, open the safety val-
ve, which is located at the top of the mounting
bracket. Release any residual pressure from the
keg by pulling on the ring.
Loosen the knurled screws on each side of the
mounting bracket. Grasp the bracket in the
middle above the tapper and draw it out of the
empty beer keg.
Maintenance
It is important that the dispenser is always kept in perfect condition. We have
designed the Beer Buddy to be especially tough, with both a sturdy container
and robust components, to give you lasting pleasure from your purchase.
However, it is important to keep an eye on the dispenser and check it at regular
intervals.
Check the dispenser at every CO2 cartridge change and every keg change. Exa-
mine the dispenser by eye and by hand to check it is still in factory condition.
Important:
The keg, the lines and the CO2 cartridge are pressurised.
If anything has come unscrewed, do not operate the Beer Buddy.