Bottoms Up Beer BEER BUDDY, Инструкция по эксплуатации

Страница: 33 / 44

9
Now attach the mounting bracket to the keg.
First, take the curved ends of the knurled
screws and unscrew them far enough to fit
over the keg. Then screw the knurled screws
evenly back in, so that they grip under the
protruding edge of the keg.
The dispenser is now securely fixed to the keg.
Important:
When assembling, you may find that some
beer overflows between the dispenser and the
keg, as the volume of the tapper displaces the
volume in the keg.
Step 3) Setting the pressure
Important:
The pressure regulator is still closed.
Now take hold of a Bottoms Up glass or reusable cup. Make sure the magnet is
flat and centrally positioned to close the metal ring at the bottom of your glass.
More detailed instructions can be found under ‘Dispensing’.