Boston Whaler 240 Outrage Скачать руководство пользователя страница 27

Страница: 27 / 44

Section 5 - Water & Waste System

240 Outrage-Owners Manual

Your 240 Outrage has a head compart-

ment located on the port side of the

console. It is fitted with a Porta-Potti

waste containment system that in-

cludes: The Porta-Potti unit, vent and

associated hoses and clamps. The Porta-potti sys-

tem has a lower tank and an upper tank. Waste is

directed to the lower section of the tank which has a

holding capacity of 2.8 gal. (10.6L).

Complete operating and maintenance instructions can

be found in the sani-potti operations manual.

Head System

+($'

6<67(0

Both intake and discharge seacocks should always

be in the closed position when the toilet is not in use.

Failure to do so could result in flooding, property dam-

age and loss of life.

CAUTION

This boat is equipped with an optional direct discharge

valve. Discharging of sewage directly overboard is

for use where approved only.

NOTICE

There are severe state and federal penalties for dis-

charging raw sewage and solid waste in waters where

it is not permitted. Check with local authorities on

where this is permissible, if possible employ the use

of a shore side discharge.

NOTICE

Upper Bowl

Discharge

Hose

Porta-Potti Unit

MACERATOR (Optional)

The 240 Outrage waste system can also incorporate

the use of a macerator. The macerator pump draws

solid and liquid waste from the holding tank of the

unit and processes it prior to discharging it overboard

through a seacock.

The pump is designed to handle waste, toilet tissue

and facial tissue and will not pump solid objects. The

dockside facility will have a connection to fit your

boat. It is important that you close your macerator

discharge seacock on the 240 Outrage prior to using

the shoreside discharge function.

There are bodies of water where discharge of raw

sewage is prohibited.

Contact your dealer or Coast Guard station for infor-

mation on overboard discharge and its penalties.

MACERATOR OPERATION:

The macerator key switch panel is located on the

forward section of the console cabin. The key switch

controls the macerator pump. The raw water intake

seacock and and the overboard discharge seacock

must be in the OPEN position prior to operation. The

key must be turned and held for the macerator to

operate properly.

MAINTENANCE:

After long periods of non-use, the macerator pump

may not turn freely. Regular use of the system will

reduce the chances of this occuring. If the system

does require maintenance contact your nearest dealer

for more information. Because your porta-potti sys-

tem is a low water use device, there is special paper

that must be used to prevent clogs. The manufac-

turer has provided information regarding the type of

paper that must be used.

NEVER use residential tissue paper in your marine

waste system.

Lower Bowl

Overboard Discharge

Key Switch for

Macerator

Breaker

OVERBOARD

DISCHARGE

SHORE SIDE DISCHARGE:

The shoreside discharge deck plate for the 240 Out-

rage is located on the starboard side of the gunwale

and is marked WASTE. Access to the port is gained

by use of a special key that is included in the owners

manual packet. The dockside facility will have a con-

nection to fit your boat.

Shore side discharge is a

preferred method of waste disposal.

Содержание 240 Outrage













































Результаты поиска

Содержание 240 Outrage

Отзывы:

Похожие инструкции для 240 Outrage

Бренды по названию

Популярные бренды

Boston Whaler 240 Outrage, Руководство пользователя

Результаты поиска

Содержание 240 Outrage

Отзывы:

Похожие инструкции для 240 Outrage

Бренды по названию

Популярные бренды