44
Se
tting Up Y
our
Communic
at
or
LATITUDE™ Communicator
Patient Manual
2.
Plug the power supply into an electrical outlet that is easily
accessible.
•
The LATITUDE indicator will flash yellow for up to 1
minute.
•
All the Communicator indicators will light for
approximately 1 second.
• If the LATITUDE indicator is not lit, check that both ends
of the power supply are plugged in firmly. Check if the
light on the power supply is lit.
3.
Plug one end of the Communicator telephone cable into
the jack labeled
.
4.
You may need to use a telephone jack adapter. If you
do, plug the other end of the telephone cable into the
telephone jack adapter. Then plug the other end of the
cable into the telephone jack on the wall.
Note
Note
: If you have DSL internet service, you may need to
use a DSL filter between the telephone wall jack and the
Communicator. Refer to
“DSL Internet Service” on page
47.
5.
When the Heart button flashes on your
Communicator, press it.
•
Your Communicator’s wave lights will flash green in
sequence and repeat for several minutes as shown in
“Using the Heart Button” on page 16
•
If this process takes longer than several minutes,
software download and installation may be occurring. If
the Heart button flashes again, press it again. Refer to
Содержание LATITUDE 6288
