36
Se
tting Up Y
our
Communic
at
or
LATITUDE™ Communicator
Patient Manual
When using the cellular connection method:
•
Place your Communicator in a location where you will get a
good cellular signal.
•
Place your USB cellular adapter away from electronic
products or metal surfaces, and place it alongside the
Communicator, not under or on top it.
•
Maintain a distance of at least 15 cm (6 in) between the USB
cellular adapter and your implanted device.
Refer to
“Figure 6. Connecting a USB Cellular Adapter” on page
35 for depiction of steps 1-4.
1. Insert the power supply (included) into the jack
labeled
.
2.
Plug the power supply into an electrical outlet that is easily
accessible.
•
The LATITUDE indicator will flash yellow for up to 1
minute.
•
All the Communicator indicators will light for
approximately 1 second.
• If the LATITUDE indicator is not lit, check that both ends
of the power supply are plugged in firmly. Check if the
light on the power supply is lit.
3. If the USB cellular adapter has a cap, remove it. Connect the
adapter to the provided USB cable extension.
4. Insert the USB connector of the cable extension into
one of the USB ports labeled
on the back of your
Communicator.
Содержание LATITUDE 6288
