16
Controller Programming
Do not alter any settings without first understanding the implications of doing so.
Incorrect settings may cause damage to the equipment, system or property.
To enter the programming menu, hold the (+) button until “enter code” appears on the screen,
followed by “0000” with a flashing cursor after the first digit.
To gain access to the programming menu, one of the following codes must be entered:
Customer Code
Standard set of options
0823
Engineer Code (≥V6.3)
Extended set of options
4706
Engineer Code (<V6.3)
Extended set of options
0426
To enter the code, change the first digit with the (+) and (-) buttons, then press (SET) to move onto
the next digit. Repeat for all digits, then once the correct code is shown on the display, press (SET) to
enter the programming menu.
Once a correct code has been entered, the first option [COLD FILL] will appear on the screen.
Once in the menu, the value of the current menu item can be changed using the (+) and (-) buttons.
Once the current value has been set, pressing the (SET) button will move on to the next option.
It is not possible to navigate backwards through the menu. To return to a previous
setting in the menu, press the (SET) button repeatedly to scroll through to the end of
the menu, and then re-enter the appropriate code.
If the controller looses power while in the programming menu, all changes made will
be erased. To confirm all changes, the end of the menu must be reached, and the
“SAVING...” message must be displayed.
Содержание AX1-2.5E
