Boss Snowplow RT3 EXT, Руководство по установке

Страница: 7 / 32

Installation
Determine the left and right sides of the machine from
the normal operating position.
Installing the Push Frame
and Shock Absorber
If desired, install optional plow shoes before starting
this installation.
1. Attach the front of the push-frame assembly
to the plow blade using 3 bolts (3/4 inch) and
self-locking nuts (
Figure 3 ).
g204047
Figure 3
1. Bolt (3/4 inch) 3. Self-locking nut (3/4 inch)
2. Push-frame assembly 4. Lift point
2. Pull the kickstand spring pin and insert the
kickstand into the mounting bracket, then
release the spring pin to lock the kickstand in
place in the lowered position (
Figure 4 ).
g036645
Figure 4
1. Kickstand spring pin 2. Kickstand
3. Secure the end of the shock absorber to the
push-frame assembly using a bolt (5/8 inch) and
locknut as shown in
Figure 5 .
Note:
Do not tighten the bolt and locknut at this
time.
Note:
Ensure that the bolt head is on the right
side of the mounting bracket.
g036646
Figure 5
1. Locknut (5/8 inch) 4. Blade shock-mount
2. Bolt (5/8 inch) 5. Locknuts (3/8 x 1-1/2 inch)
3. Bolts (3/8 x 1-1/2 inch) 6. Shock absorber
4. Attach the blade shock-mount to the top of
the shock absorber using a bolt (5/8 inch) and
locknut as shown in
Figure 5 .
Note:
Do not tighten the bolt and locknut at this
time.
7