Boss Snowplow RT3 EXT, Руководство по установке

Страница: 10 / 32

g036651
Figure 10
1. 90° fittings 5. Lower hose-clamp
2. 1.8 m (73-1/2 inch) hose 6. Upper hose-clamp
3. 1.5 m (59-1/2 inch) hose 7. Bolt (5/16 x 2-1/2 inches)
4. Nut (5/16 inch)
6. Connect the 1.8 m (73-1/2 inch) hose to the
outer fitting on the left wing-cylinder (
Figure 10 ).
Turn the fitting until it is finger tight, then turn it
another 1/4 to 1/2 turn.
Important:
Do not overtighten.
7. Repeat steps 1 through 6 for ports XR1 and XR2
on the right side of the machine.
8. Install the 45 cm (18 inch) hose to the L port on
the hydraulic shelf and the lower fitting on the
lift cylinder (
Figure 11 ). Turn the fitting until it is
finger tight, then turn it another 1/4 to 1/2 turn.
Important:
Do not overtighten.
g036652
Figure 11
1. 39 cm (15-1/2 inch) hose 2. 45 cm (18 inch) hose
9. Remove the plug on the upper fitting on the lift
cylinder.
10. Install the 39 cm (15-1/2 inch) hose to the Aux
port on the hydraulic shelf (
Figure 11 ). Turn the
fitting until it is finger tight, then turn it another
1/4 to 1/2 turn.
10