Boss Snowplow RT3 DXT, Руководство по установке

Страница: 22 / 36

Joystick Controller
The joystick controller operates the movement of the
snowplow. You can rotate the Raise/Lower switch for
right or left hand operation by pulling up the joystick
and rotating it to the desired position.
g033062
Figure 39
1. Joystick 3. On/Off switch
2. Raise/Lower switch
•
On/Off switch—turns the plow controller on and off.
A red light illuminates when the controller is on.
Note:
Turn off the controller when not in use to
prevent accidental activation of the plow.
•
Raise/Lower switch—raises or lowers the plow
blade. Press the switch up to raise the plow. Press
the switch down to lower the plow.
•
Directional joystick—controls the direction that the
plow moves
– To activate the Float feature, press the
Riase/Lower switch down until it clicks into
the detent position, allowing the plow blade to
follow the contour of the ground. The switch
stays in the Float position until it is pressed
up again.
– To move the right plow wing out, push the
joystick diagonally right and forward.
– To move the left plow wing out, push the
joystick diagonally left and forward.
– To make the scoop shape with the plow, move
both wings out and push the joystick forward.
– To make the V shape with the plow, move both
wings in and pull the joystick backward.
– To move the right plow wing in, pull the joystick
diagonally right and backward.
– To move the left plow wing in, pull the joystick
diagonally left and backward.
– To angle the entire plow blade right, move the
right wing in, the left wing out, and push the
joystick right.
– To angle the entire plow blade left, move the
right wing out, the left wing in, and push the
joystick left.
SmartTouch2 Controller
The SmartTouch2 controller operates the movement
of the snowplow.
Note:
Plows equipped with D-Force must have a
SmartTouch2 controller with a red center button.
g033007
Figure 40
1. Raise button 6. Left Wing In button
2. Lower button 7. Angle left
3. Left Wing Out button 8. Scoop
4. Right Wing Out button 9. Angle right
5. Right Wing In button 10. V
•
On/Off switch—turns the plow controller on and off.
A green light illuminates when the controller is on.
Note:
Turn off the controller when not in use to
prevent accidental activation of the plow.
•
Raise button—raises the plow blade. Pressing the
button quickly twice automatically raises the blade
when Express Raise mode is enabled.
•
Lower button—lowers the plow blade and activates
the F
LOAT
and D-F
ORCE
features.
– F
LOAT
—double tapping the button or holding it
for 2 seconds automatically lowers the blade
and activates the F
LOAT
feature, allowing the
plow blade to follow the contour of the ground.
A red light illuminates when the F
LOAT
feature
is active.
– D-F
ORCE
(optional)—if your plow is equipped
with the D-F
ORCE
feature, double tapping the
button a second time activates it, applying a
downward force on the blade to improve back
blading. An orange light illuminates when the
D-F
ORCE
feature is active.
Note:
You can only activate the D-F
ORCE
feature twice before the plow must be raised.
22