background image

To The Owner 

  

Thank You! 
 

Thank you for purchasing a BOSS Log Splitter. It was carefully engineered to provide excellent performance when properly 
operated and maintained. 
 

Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate  
and maintain your machine.  Please be sure that you, and any other persons who will operate the machine, carefully follow  
the recommended safety practices at all times. Failure to do so could result in personal injury or property damage. 
 

All information in this manual is relative to the most recent product information available at the time of printing. Review  
this manual frequently to familiarize yourself with the machine, its features and operation.  Please be aware that this 
Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed 
and/or illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, 
designs and equipment without notice and without incurring obligation. 
  

The 3-Point Hitch log splitter is designed for CAT 1 and CAT 2 tractors that ideally produce the hydraulic flow of 8 – 16 GPM  
at the pressure ratings of 2000 to 3200 PSI. DO NOT exceed 3700 PSI. The tractor pressure ratings can be found at the tractor 
manufacturer’s manual. If you have any problems or questions concerning the machine, phone an authorized service dealer 
or contact us directly. Boss Industrial’s customer support phone number, website and mailing address can be found on this 
page. We want to ensure your complete satisfaction at all times. 
 

Boss Industrial reserves the right to discontinue, change, and improve its products at any time without notice or obligation to 
the purchaser. The description and specifications contained in the manual were in effect at printing. Equipment described 
within this manual may be optional. Some illustrations may not be applicable to your machine. 

Throughout this manual, all references to right and left side of the machine are observed from the operating position 
The tractor manufacturer is responsible for all tractor-related issues with regards to performance, power-rating,  
specifications, warranty and service. Please refer to the tractor manufacturer’s Owner’s/Operator’s Manual for more 
information.  
 

 

Customer Support 

 

Please do NOT return the machine to the retailer or dealer without first contacting the Customer Support 
Department. 

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of 
this machine, you can seek help from the experts. Choose from the options below: 
 

 

Visit us on the web at www.boss-industrial.com 

 

 

Call a Customer Support Representative at (800) 780-2677 or (331) 457-5670 

 

 

Write to Boss Industrial, Inc., 123 Ambassador Drive, Suite 123, Naperville, IL 60540

Содержание 3PT22T25





































Отзывы: