28
C
ONT
R
OLLI
NG
E
XT
ER
N
A
L
S
OU
RC
ES
C
ONTROLLING
E
XTERNAL
S
OURCES
English
Français
Español
Figure 12
Changing the TV Power
8.
Notice the
TV Power Status
:
•
TV Detected
means the installed TV sensor is working.
•
TV Not Detected
means the TV sensor (if installed) is not connected or not positioned
properly.
• Press
System
or
Exit
to leave the System menu.
For cable/satellite control
The cable box or satellite receiver that is connected your LIFESTYLE
®
system is the one you
should select. So when you press the
CBL
•
SAT
source button
and the
On/Off
button below
it, you are operating that device.
If you own both a cable box and satellite receiver, use the AUX option to designate the sec-
ond device brand and code.
Note:
For general guidelines on using the LIFESTYLE
®
System menu, refer to “Using System
Menus” on page 32.
Follow the cable or satellite process below:
Turn on the cable box or satellite receiver that is connected to your LIFESTYLE system. Turn
on the TV. Using the LIFESTYLE remote control, press
CBL
•
SAT
and follow these steps:
1.
Identify the device:
• From the
Remote Control
options in the System menu, select
CBL
•
SAT
Device
.
• Move right and select a device from the multiple options by pressing
Enter
.
2.
Identify the brand:
• In the menu options on the left, select
CBL
•
SAT
Brand
.
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press
Enter
to select the brand.
navigate
select
The Media Center can turn your TV on
automatically whenever you select a video source.
TV Power:
TV Power Status:
TV Aspect Ratio:
Widescreen DVDs:
Video Connector:
Video Black Level:
Automatic
TV Detected
- -
- -
Component
Normal
Video
