U
SI
NG
S
YSTEM
M
ENUS
37
U
SING
S
YSTEM
M
ENUS
English
Français
Español
*
Elimination of ADAPTiQ system adjustments is NOT automatically reversible.
Restoring these adjustments requires performing the ADAPTiQ audio calibration system again using
Disc 2. For information on how to use this process, refer to “Getting Started” in your Installation Guide.
Through use of this advanced feature, the LIFESTYLE
®
system self-adjusts its audio processing to
compensate for the furnishings, speaker placement, and positions of listeners to provide ideal sound
in your main room.
Video options
Press
System
on the LIFESTYLE
®
remote control. Move right to see a preview of video
features, and press the
Enter
button to move into the active list of video options.
Figure 18
Preview of video features
ADAPTiQ
®
Off [default]
On
Erase
No ADAPTiQ audio calibration performed.
Uses ADAPTiQ system adjustments established using Disc 2.
Eliminates the ADAPTiQ system adjustments* when this selection is
followed, within 5 seconds, by pressing the
Erase
button on the
media center control panel.
Expansion Protocol
Change this only if instructed in
the owner’s guide supplied with
your Bose
®
link remote control.
Bose
®
link [default]
Legacy
Communicates only with Bose link-compatible products in other
areas or rooms of your house.
Allows the system to communicate with Bose legacy products (like
Wave
®
radios or Wave
®
radio/CDs, which pre-date Bose link com-
patibility) and with some non-Bose products in other areas or rooms
of your house.
CBL
•
SAT/VCR Audio
(Available only if the TV-to-VS-2
connection is HDMI
TM
.)
Bose 5.1 [default]
TV Stereo
Allows you to hear cable/satellite or VCR audio in Bose 5.1 surround
sound.
Sends 2-channel HDMI audio from your cable box, satellite receiver,
or VCR to your TV speakers.
Video
TV Power
TV Power Status
Widescreen TV
Widescreen DVDs
Video Connector
Video Black Level
TV Video Format
Progressive Scan
Video Resolution
Persistent Video
Settings on TV
Select Video to adjust these system options:
navigate
select
Menu Options
Option Settings
Settings Descriptions
TV Power
Automatic [default]
Manual
Euro
TV turns on automatically when a video source is selected. This
feature only works after the TV on/off sensor is properly installed.
Refer to “Using the TV on/off sensor” in your Installation Guide.
TV does not turn on automatically.
TV responds to SCART connector input.
TV Power Status
(Indicator only; not a setting)
TV Not Detected
or TV On
Indicates TV Sensor is not installed or not positioned correctly.
Indicates TV Sensor is installed and functioning properly.
Widescreen TV
No [default]
Yes
Adjusts your system to work with a normal (4:3) TV screen size.
Adjusts your system to work with a widescreen (16:9) TV.