14
I
NSTALLATION
English
TAB 6Italiano
TAB TAB
TAB
3
TAB 5
TAB 2
TAB 4
Making antenna connections
The supplied AM and FM antennas connect to the rear
panel of the media center (Figure 10).
N o t e :
The FM connector may be used with an
outdoor antenna. Before doing this, consult a qualified
installer. Follow all safety instructions supplied with
the antenna.
F i g u r e 1 0
Connections for the AM and FM antennas
FM antenna connection
1.
Plug the connector on the FM dipole antenna lead
into the FM antenna jack.
2.
Spread out the antenna arms and change their
orientation as needed to get the best FM reception.
3.
Keep the antenna as far as possible from the media
center, display, and Acoustimass
®
module.
AM antenna connection
1.
Plug the connector on the AM loop antenna lead
into the AM antenna jack.
2.
Stand the AM antenna on the base or mount the
antenna on a wall, following the instructions
enclosed with the AM antenna.
3.
Keep the antenna as far as possible (at least 20
inches or 50 centimeters) from the media center
and display module, and at least 2 feet (60
centimeters) from the Acoustimass module.
N o t e :
AM reception can be adversely affected by a
nearby television when it is on. Turn off the TV for best AM
reception.
Cable radio as an option
Some cable TV providers make FM radio signals available
through the cable service to your home. This cable
connects to the FM antenna jack on the back panel of the
media center.
For instructions on how to make this connection, contact
your cable TV provider.
AM
FM
AM base
Claudius.book Page 14 Tuesday, January 13, 2009 2:56 PM
