Set up and connecten
2.
Loosen and remove all screws of
the 4 transport locks with a SW13
wrench.
5.
Insert the 4 cover caps.
6.
Press down the 4 cover caps.
3.
Remove the power cord from the
bracket.
4.5 Connecting the device
4.
Remove the 4 sleeves.
water inlet hose
connect
A notice:Make sure that you connect
the device to a water supply with a
safety device against drinking water
contamination through backflow
(according to DIN EN 1717). The
connection valves/water taps
provided for this purpose are
equipped with this safety device if the
house is properly installed.
15