
enTroubleshooting
Disturbance
wrinkling.
Cause and troubleshooting
Spin speed is too high.
▶
Set a lower spin speed for the next wash cycle.
Load quantity is too high.
▶
Reduce the load for the next wash cycle.
Unsuitable program set for the type of fabric.
▶
Select suitable programs for the type of fabric.
detergent or
Fabric softener drips off
the cuff and
collects on the door
or in the cuff fold.
Too much detergent/softener in the detergent drawer.
▶
When dosing liquid detergent and fabric softener,
pay attention to the mark in the detergent drawer
and do not exceed the dosing.
spin result is
unsatisfactory
lending The laundry is
too wet / too damp.
Low spin speed is set.
▶
Set a higher spin speed for the next wash cycle.
▶
Start the programSling.
Easy ironis activated.
▶
Select suitable programs for the type of fabric.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and water drain hose.
Drain pipe or water drain hose is kinked or pinched.
▶
Make sure the drain pipe and water drain hose are
not kinked or pinched.
Imbalance control system stopped spinning due to
uneven laundry distribution.
▶
Redistribute the laundry in the drum.
A notice:Put large and small items of laundry together
in the drum. Items of laundry of different sizes spread
out better when spinning.
▶
Start the programSling.
Imbalance control system compensates for
imbalance by reducing spin speed.
▶
Redistribute the laundry in the drum.
48