Troubleshootingen
Disturbance
Cause and troubleshooting
suds will not
pumped out.
Pump cover is not assembled correctly.
▶
Assemble the pump cover correctly.
Detergent dosage is too high.
▶
Immediate measure: Mix a tablespoon of fabric
softener with 0.5 liters of water and pour the
mixture into the left chamber (not for outdoor,
sportswear and down textiles).
▶
For the next wash cycle with the same load, reduce
the amount of detergent.
Impermissible extension installed on the water drain
hose.
▶
Remove impermissible extensions on the water drain
hose.
"Connecting the device", page 15
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The handle of the pump
cover must be vertical.
Water doesn't run in.
Detergent will not
washed in.
Start/Reloadwas not pressed.
▶
PressStart/Reload.
Filters in the water inlet are clogged.
▶
Clean the filters in the water inlet.
Water tap is closed.
▶
Open the faucet.
Water inlet hose is kinked or pinched.
▶
Make sure the water inlet hose is not kinked or
pinched.
Repeated
fling.
Imbalance control system compensates for imbalance by
distributing the laundry several times.
▶
No error - no action necessary.
A notice:When loading, put as large and small items of
laundry as possible together in the drum. Items of
laundry of different sizes spread out better when
spinning.
Change program duration
changes during the
washing process.
Program flow is electronically optimized. This can lead
to a change in the program duration.
▶
No error - no action necessary.
Imbalance control system compensates for imbalance by
distributing the laundry several times.
▶
No error - no action necessary.
45